Hand Tools
(Click on Thumbnails for Larger Image)
Hand Crimpers:
If you need to crimp duct on site, then you need a hand crimper to do that job right.
Klenk Offset Hand Crimper K6:
Malco 5 Blade Hand Crimpers #C5:
Malco 6 Blade Offset Hand Crimper #C6:
)
)
)
Malco Hand Notcher #N1:
)
Fast and easy cutting. Notcher makes a clean 30° “V” shaped cut in sheet metal. 13/16" (20.6 mm) maximum throat depth.
Clamps & Pliers:
11" Wide Jaw Locking Clamp
6" Longnose Locking Pliers
)
)
Snap Lock Punches:
Malco Snap Lock Punch SL1:
Join sheet metal, duct and pipe sections economically. No need for extra hardware. Punches raise a louvered shaped projection on metal edge for locking into rolled edge of sheet or piece to be joined.
Malco Snap Lock Punch SL5:
Snap lock plastic skirting and siding to finishing trim. Makes tabs in the cut edge of siding panel used as a finishing course at top of wall or below window. Tabs lock into utility trim.
)
)
Malco Hole Cutter #HC1:
)
Malco Hole Cutters quickly install into the chuck of any corded or cordless drill as small as 1/4" (6.4 mm). Lightweight aluminum frames make these accessories extremely portable for a variety of hole cutting applications in sheet metal including 20-gauge (1.02 mm) galvanized steel.
Replacement bits are also available.
)
Wire Brushes:
)
4" x 11" Wire Brush
Chipbrush:
)
Nut Drivers:
1/4" Adjustable Length Handled Nut Driver:
1/4" Handled Nut Driver:
5/16" Standard Magnetic Driver:
)
)
)
Duct Stretchers:
)
)
Use the Duct Stretcher to hold duct in place with one hand while slipping drive cleat in place with other hand.
In Stock: Regular duct stretcher, offset duct stretcher
Siding Removal Tool SRT1:
)
High Speed Countersink:
)
4" Plastic Putty Knife:
)
Select-A-Bit Multi-Screwdriver:
)
Replaces 16 different screwdrivers with extra long industrial grade bits. All bits store in the handle for easy access and storage. Heavy duty reversible ratchet mechanism on an adjustable nosepiece that locks into the angle you need.
Heavy Duty Tensioning Tool:
)
Let the tensioning tool clamp your flex duct tightly together more easily, and faster.
Combo Drive Tool:
)
A versatile tool for duct work in the field. Functions as a ruler, a metal scribe, a folding tool, and a duct stretcher.
End Cutting Nippers:
)
4-Way Keychain Screwdriver:
)
Pocket 4-In-1 Screwdriver:
)
5 Piece Ratchet / Offset Screwdriver Set:
)
Ratchet Offset Screwdriver:
)
Handled Reamer, 1/8" to 3/8":
)
Flaring Tool, 3/16" to 5/8":
)
1/2" Pipe and Fitting Brush:
)
Telescoping Magnetic Pick-Up:
)
Sizes in Stock: 23 1/2" Long
Chimney Cleaning Brushes & Accessories:
)
6” Round, Polypropylene Chimney Brush
8” Round, Polypropylene Chimney Brush
72” Fiberglass Extensions, 1/4” Thread .350 Diameter