Dampers & Damper Hardware
(Click on Thumbnails for Larger Image)
Warm Air Dampers:
)
Sizes in Stock: 4", 5", 6", 7", 8", 9", 10", 12", 14", 8"x8", 8"x10", 8"x14", 8"x18", 8"x24"
Custom sizes available by request!
Type A Static Fire Dampers:
)
Sizes Available: 6", 8", 12", 16", 20", 24", 28", 32", 36", 40", 44", 48"
Type B Static Fire Dampers:
)
Sizes Available: 6", 8", 12", 16", 20", 24", 28", 32", 36", 40", 44", 48"
Type C Static Fire Dampers:
)
Sizes Available: 6", 8", 12", 16", 20", 24", 28", 32", 36", 40", 44", 48"
Type A Round Fire Dampers:
)
Sizes Available: 4", 5", 6", 7", 8", 9", 10", 12", 14"
Galvanized Butterfly Dampers:
)
Sizes in Stock: 4", 5", 6", 7", 8", 10", 12"
Spring Loaded Galvanized Butterfly Dampers:
Sizes in Stock: 4", 6"
Inline Dampers:
)
Sizes in Stock: 6"
Cast Iron Dampers:
)
Sizes in Stock: 6", 8"
Barometric Dampers:
RC Type For Oil or Wood Furnaces: 5", 6", 7", 8"
Submittal-PDFM Type for Oil or Wood Furnaces: 6", 7", 8", 16"
Submittal-PDFMG Type for Gas Furnaces: 6", 9"
Submittal-PDF
)
)
)
Damper Hardware:
1/4" Square End Bearing, Regular Length #B14
1/2" Parallel Blade Kit #CK2
1/2" Opposed Blade Kit #CK04
1/2" Bronze Bushing #CKP10
Strap and Set Screw #CKP13
Set Screw #CKP15
1/2" Round, 2 1/2" Long Pin #CKP5
1/2" Round, 6" Long Pin #CKP8
1/4" Bracket #CKP814
1/2" Dial Damper, Quadrant Only
1/4" Damper Quadrant and Bearing Set #DS14
1/4" Long Damper Regulator Set #DS14L
3/8" Long Damper Quadrant and Bearing Set #DS38
Kwiki Regulator Damper Kit #K102
Kwiki Regulator Damper Washer #K704
Kwiki Regulator Damper Handle #K705
Kwiki Regulator Damper Wing Nut #K706
Kwiki Regulator Damper Bearing #K708
1/2" Damper Set with 2 Bearings #QS12
3/8" Damper Set with 2 Bearings #QS38
1/2" Round Clamp on Quadrant Only #RH12
1/4" Spring Bearing, Regular Length #SB14
3/8" Spring Bearing, Regular Length #SB38
3/8" Spring Bearing Long #SB38L
1/4" Splitter Damper Bracket #SDB40
1/4" Ball Joint #SDC14
5/16" Ball Joint #SDC516
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)